 |
 
|
BANDING AND WINDING
MACHINE |
|
 Heavy
duty Banding & winding machine is designed for production of
armature banding, coil and form windings and transformer coil
winding. The machines comes complete with Glass Tape and Wire
Tension Device Model TD. |
MODEL : BWM |
|
Particulars |
Parameters |
|
Armature weight |
6000 kgs |
|
Armature diameter |
1000 mm |
|
Armature length |
3000 mm |
|
Armature Shaft Diameter |
120 - 270 mm |
|
Face Plate diameter |
600 mm |
|
Face Plate speed |
0 -20 RPM |
|
Head stock Drive |
20 HP DC Motor |
|
Turns Counter (Electronic) |
4 Digit |
|
Tension Device Carriage Drive |
1 HP DC Motor |
|
Carriage Feed Speed |
0 - 800 mm/ minute |
|
Operating Voltage |
415 Volt 3 Phase |
|
|
[
Request a Quote ]
BEARING/COUPLING PULLER
Model-BCP 50T
 It is designed
and manufactured out of tested steel mounted on wheels to meet the
requirement of electric motors rewinding shops and maintenance
workshop. Hydraulic
ram can be lowered or raised as per job center height for perfect
alignment by local or remote push button.
Hydraulic ram delivers 50T force at 10000Psi pressure and is
operated through electrically driven hydraulic power packs. Pressing
force can be varied from 0-50 ton by pressure relief valve. Machine
can be used as press by fixing strong back for pressing shaft in
small rotor.
TECHNICAL SPECIFICATION
|
|
Particulars |
|
Parameters |
| Pam Pressure |
: |
50 tons |
| Ram Height (Adjustable) |
: |
350 – 1450 mm |
| Tension Leg width |
: |
200 – 1000 mm |
| Tension Leg Length |
: |
200-1000mm |
| Net Weight |
: |
700 kg |
|
|
|
[
Request a Quote ]
COIL CUT-OFF AND PULLING
MACHINE
 The machine is very useful and well designed. Guarantees fast and
easy winding Head/Overhang Cut-Off and Coil Pulling without damaging
core laminations.
SALIENT FEATURES
- Coil cut-off and coil removing is done on
the machine.
- Clean cutting and is below turntable.
- Vision unrestricted as the fastening
device is below turntable.
- Foot Switch operated hydraulic pulling
system.
|
|
MODEL
|
CCOP/A |
CCOP/B
|
CCOP/C |
CCOP/D |
| Turntable
diameter |
600 |
850 |
1200 |
1500 |
| Stator dia
|
50-500 |
100-750 |
150-1100 |
200-1400 |
| Stator length |
700 |
900 |
1100 |
1200 |
| Cut-off Motor
(hp) |
2 |
3 |
5 |
4 |
| Stator Clamp |
-----------Mechanical----------- |
|
|
[
Request a Quote ]
|
|
<< Previous |
Next >> |
| |
|
